VALVE CLEARANCE INSPECTION [WL-C, WE-C]

id0110b6503500

1. Remove the cylinder head cover.

2. Turn the crankshaft and align the timing mark so that the piston of the No. 1 or No. 4 cylinders is at TDC of compression.

3. Measure valve clearances A with the No.1 cylinder at TDC of compression, and those of B with the No.4 cylinder at TDC of compression.

• If it is not within the specification, adjust and recheck the valve clearance. (See VALVE CLEARANCE ADJUSTMENT [WL-C, WE-C].)

bwl1ge00000273

bwl1ge00000274

Valve clearance [Engine cold]

IN: 0.10—0.16 mm {0.0040—0.0062 in}

EX: 0.17—0.23 mm {0.0067—0.0090 in}

4. Turn the crankshaft one full turn and measure the remaining valve clearances. Adjust if necessary.

5. Install the cylinder head cover.