ELECTRICAL SYSTEM

id000000157000

Connectors

Disconnecting connectors

•  When disconnecting connector, grasp the connectors, not the wires.

bms1zm00000024

•  Connectors can be disconnected by pressing or pulling the lock lever as shown.

bms1zm00000025

Locking connector

•  When locking connectors, listen for a click indicating they are securely locked.

bms1zm00000026

Inspection

•  When a tester is used to inspect for continuity or measuring voltage, insert the tester probe from the wiring harness side.

bms1zm00000027

•  Inspect the terminals of waterproof connectors from the connector side since they cannot be accessed from the wiring harness side.

Caution

•  To prevent damage to the terminal, wrap a thin wire around the tester probe before inserting into terminal.

bms1zm00000028