DTC P1603 [WL-C, WE-C (Australian, European (L.H.D. U.K.) specs.)]
id0102c4838200
|
DTC P1603 |
ID Number Unregistered |
|---|---|
|
DETECTION CONDITION
|
• PCM internal malfunction
|
|
POSSIBLE CAUSE
|
• After programming the immobilizer system, the DTC has not been cleared.
• The immobilizer system has not been programmed.
• PCM malfunction
|
Diagnostic procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
VERIFY FREEZE FRAME DATA HAS BEEN RECORDED
• Has FREEZE FRAME DATA been recorded?
|
Yes
|
Go to the next step.
|
|
No
|
Record the FREEZE FRAME DATA on the repair order, then go to the next step.
|
||
|
2
|
VERIFY RELATED SERVICE INFORMATION AVAILABILITY
• Verify related service information availability.
• Is any related service information available?
|
Yes
|
Perform repair or diagnosis according to the available service information.
• If the vehicle is not repaired, go to the next step.
|
|
No
|
Go to the next step.
|
||
|
3
|
START THE ENGINE
• Start the engine.
• Can the engine be started?
|
Yes
|
Clear the DTC.
If DTC P1603 is displayed again even if it had been cleared, replace the PCM.
|
|
No
|
Program the immobilizer system and go to the next step.
|
||
|
4
|
VERIFY AFTER REPAIR PROCEDURE
• Perform the “After Repair Procedure“.
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
Troubleshooting completed.
|
||