DRIVE BELT ADJUSTMENT [WLT-1, WLT-2]

id011096804500

Generator

1. Loosen the mounting bolt C and locknut A.

2. Adjust the belt deflection or tension by turning adjusting bolt B. (See DRIVE BELT INSPECTION [WLT-1, WLT-2].)

3. Tighten the mounting bolt C and locknut A.

absggw00000548

4. Tighten the adjust bolt B.

Tightening torque

7.84—9.80 N·m {80—100 kgf·cm, 69.4—86.7 in·lbf}

5. Inspect the belt deflection or tension. (See DRIVE BELT INSPECTION [WLT-1, WLT-2].)

A/C

1. Loosen the locknut A.

2. Adjust the belt deflection or tension by turning adjusting bolt B. (See DRIVE BELT INSPECTION [WLT-1, WLT-2].)

3. Tighten the locknut A.

absggw00000549

4. Inspect the belt deflection or tension. (See DRIVE BELT INSPECTION [WLT-1, WLT-2].)