DISTRIBUTOR REMOVAL/INSTALLATION [F2]

id011894103300

1.  Disconnect the negative battery cable.

2.  Remove in the order indicated in the table.

3.  Install in the reverse order of removal.

4.  Adjust the ignition timing. (See ENGINE TUNE-UP [F2].)

arnffw00000690

1	High-tension lead
2	Connector
3	Distributor (See Distributor Installation Note.)

Distributor Installation Note

1.  Verify that the No.1 cylinder is at top dead center, and align the distributor matching marks.

arnffw00000691