ENGINE COOLANT TEMPERATURE (ECT) SENSOR REMOVAL/INSTALLATION [G6]

id014095801900

Warning

• When the engine is hot, it can badly burn. Turn off the engine and wait until it is cool before removing or installing the ECT sensor.

1. Drain the engine coolant. (See ENGINE COOLANT REPLACEMENT [G6].)

2. Disconnect the ECT sensor connector.

3. Remove the ECT sensor.

absggw00000382

4. Replace the gasket.

5. Install in the reverse order of removal.

Tighten torque

25—29 N·m {2.5—2.9 kgf·m, 19—21 ft·lbf}

6. Refill the engine coolant. (See ENGINE COOLANT REPLACEMENT [G6].)