• The double wishbone suspension, which has I-shape lower arms and tension rods, is used for the front suspension of 4x2 models.
• The double wishbone suspension, which has A-shape lower arms, is used for the front suspension of 4x2 (high clearance model) and 4x4 models. A-shape lower arms have high rigidly and durability.
• The torsion bar springs are used for both 4x2 and 4x4 models.
The torsion bar spring is per-coiled in one direction. It therefore gives ample spring performance when installed correctly, but only half if installed in reverse.
An R (right) or L (left) is marked on the rear end of the bar to distinguish one form the other.
The left and right, and 4x2 and 4x4 torsion bar springs are not interchangeable.