NO.2 NO RFW OPERATION FROM LOCK TO FREE (RFW INDICATOR LIGHT DOES NOT GO OFF) [G6, WLT-1, WLT-2]
id030303801700
|
2
|
NO RFW OPERATION FROM LOCK TO FREE (RFW INDICATOR LIGHT DOES NOT GO OFF.)
|
|
DESCRIPTION
|
RFW does not change from lock to free.
|
|
[TROUBLESHOOTING HINTS]
• Transfer neutral switch malfunction
• 4x4 indicator switch malfunction
• RFW control module malfunction
• Free solenoid valve malfunction
• Lock solenoid valve malfunction
• RFW control box malfunction
• METER*1 fuse malfunction
• ENGINE*2 fuse malfunction
• RFW main switch malfunction
• RFW actuator malfunction
• RFW switch malfunction
• Air leakage from vacuum reservoir or actuator system malfunction
• One-way check valve malfunction
• Print plate in instrument cluster malfunction
• Related fuses and/or harnesses malfunction
|
|
Diagnostic procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
Disconnect RFW control module connector.
Is there continuity between RFW control module connector terminal F and ground?
|
Yes
|
Go to next step.
|
|
No
|
Go to Step 3.
|
||
|
2
|
Disconnect instrument cluster connector No.2.
Is there continuity between instrument cluster terminal 2H and ground?
|
Yes
|
Repair wiring harness between RFW control module and instrument cluster.
Then go to Step 32.
|
|
No
|
Inspect for no continuity between instrument cluster terminal 2H and ground.
|
||
|
3
|
Turn ignition switch or engine switch off.
Disconnect RFW control module connector.
Turn ignition switch or engine switch on.
Measure voltage between RFW control module connector terminal H and ground.
Is the voltage greater than 10 V?
|
Yes
|
Go to Step 5.
|
|
No
|
Turn ignition switch or engine switch off.
Then go to next step.
|
||
|
4
|
Is the METER*1, ENGINE*2 fuse OK?
|
Yes
|
Repair wiring harness between METER*1, ENGINE*2 fuse and RFW control module.
Then go to Step 32.
|
|
No
|
Replace METER*1, ENGINE*2 fuse.
Then go to Step 32.
|
||
|
5
|
Disconnect free solenoid valve connector.
Measure voltage between free solenoid valve connector terminal A and ground.
Is the voltage greater than 10 V?
|
Yes
|
Connect free solenoid valve.
Then go to Step 32.
|
|
No
|
Repair wiring harness between METER*1, ENGINE*2 fuse and RFW control module.
Then go to Step 32.
|
||
|
6
|
Measure voltage between free solenoid valve connector terminal B and ground.
Is the voltage greater than 10 V?
|
Yes
|
Go to next step.
|
|
No
|
Inspect free solenoid valve.
Then go to Step 32.
|
||
|
7
|
Measure voltage between RFW control module connector terminal C and ground.
Is the voltage greater than 10 V?
|
Yes
|
Go to next step.
|
|
No
|
Repair wiring harness between free solenoid valve and RFW control module.
Then go to Step 32.
|
||
|
8
|
Disconnect lock solenoid valve connector.
Measure voltage between lock solenoid valve connector terminal A and ground.
Is the voltage greater than 10 V?
|
Yes
|
Connect lock solenoid valve.
Then go to next step.
|
|
No
|
Repair wiring harness between METER*1, ENGINE*2 fuse and RFW control module.
Then go to Step 32.
|
||
|
9
|
Measure voltage between lock solenoid valve connector terminal B and ground.
Is the voltage greater than 10 V?
|
Yes
|
Go to next step.
|
|
No
|
Inspect lock solenoid valve.
Then go to Step 32.
|
||
|
10
|
Measure voltage between RFW control module connector terminal A and ground.
Is the voltage greater than 10 V?
|
Yes
|
Go to next step.
|
|
No
|
Repair wiring harness between lock solenoid valve and RFW control module.
Then go to Step 32.
|
||
|
11
|
Turn ignition switch or engine switch off.
Is there continuity between RFW control module connector terminal B and ground?
|
Yes
|
Go to next step.
|
|
No
|
Repair wiring harness between RFW control module and ground.
Then go to Step 32.
|
||
|
12
|
Shift select lever to N position.
Is there continuity between RFW control module connector terminal L and ground?
|
Yes
|
Go to Step 16.
|
|
No
|
Go to next step.
|
||
|
13
|
Is there continuity between transfer neutral switch connector terminal A and ground?
|
Yes
|
Repair wiring harness between RFW control module and transfer neutral switch.
Then go to Step 32.
|
|
No
|
Go to next step.
|
||
|
14
|
Inspect transfer neutral switch.
Is it OK?
|
Yes
|
Go to next step.
|
|
No
|
Replace transfer neutral switch.
Then go to Step 32.
|
||
|
15
|
Is there continuity between transfer neutral switch connector terminal B and ground?
|
Yes
|
Go to next step.
|
|
No
|
Repair wiring harness between transfer neutral switch and ground.
Then go to Step 32.
|
||
|
16
|
Shift select lever to 2H position.
Is there continuity between RFW control module connector terminal K and ground?
|
Yes
|
Go to Step 20.
|
|
No
|
Go to next step.
|
||
|
17
|
Is there continuity between 4x4 indicator switch connector terminal A and ground?
|
Yes
|
Repair wiring harness between RFW control module and 4x4 indicator switch.
Then go to Step 32.
|
|
No
|
Go to next step.
|
||
|
18
|
Inspect 4x4 indicator switch.
Is it OK?
|
Yes
|
Go to next step.
|
|
No
|
Replace 4x4 indicator switch.
Then go to Step 32.
|
||
|
19
|
Is there continuity between 4x4 indicator switch connector terminal B and ground?
|
Yes
|
Go to next step.
|
|
No
|
Repair wiring harness between 4x4 indicator switch and ground.
Then go to Step 32.
|
||
|
20
|
Shift select lever to 4H position.
Is there continuity between RFW control module connector terminal J and ground?
|
Yes
|
Go to Step 28.
|
|
No
|
Go to next step.
|
||
|
21
|
Is there continuity between RFW switch connector terminal A and ground?
|
Yes
|
Repair wiring harness between RFW switch.
Then go to Step 32.
|
|
No
|
Go to next step.
|
||
|
22
|
Inspect RFW switch.
Is it OK?
|
Yes
|
Go to next step.
|
|
No
|
Replace RFW switch.
Then go to Step 32.
|
||
|
23
|
Is there continuity between RFW switch connector terminal B and ground?
|
Yes
|
Go to next step.
|
|
No
|
Repair wiring harness between RFW switch and ground.
Then go to Step 32.
|
||
|
24
|
Push RFW main switch on.
Is there continuity between RFW main switch connector terminal I and ground?
|
Yes
|
Go to Step 28.
|
|
No
|
Go to next step.
|
||
|
25
|
Is there continuity between RFW main switch connector terminal F and ground?
|
Yes
|
Repair wiring harness between RFW main switch and RFW control module.
Then go to Step 32.
|
|
No
|
Go to next step.
|
||
|
26
|
Inspect RFW main switch.
Is it OK?
|
Yes
|
Go to next step.
|
|
No
|
Replace RFW main switch.
|
||
|
27
|
Is there continuity between RFW main switch connector terminal D and ground?
|
Yes
|
Go to next step.
|
|
No
|
Repair wiring harness between RFW main switch and ground.
Then go to Step 32.
|
||
|
28
|
Inspect one-way check valve.
Is it OK?
|
Yes
|
Go to next step.
|
|
No
|
Replace one-way check valve.
Then go to Step 32.
|
||
|
29
|
Inspect RFW actuator.
Is it OK?
|
Yes
|
Go to next step.
|
|
No
|
Replace RFW actuator.
Then go to Step 32.
|
||
|
30
|
Inspect vacuum in vacuum hoses.
Is it OK?
|
Yes
|
Go to next step.
|
|
No
|
Replace vacuum in vacuum hoses.
Then go to Step 32.
|
||
|
31
|
Inspect RFW control module.
Is it OK?
|
Yes
|
Go to next step.
|
|
No
|
Repair or replace RFW control module.
Then go to next step.
|
||
|
32
|
Turn ignition switch or engine switch on.
Shift select lever from 2H to 4H position.
Does RFW operate from free to lock?
|
Yes
|
Troubleshooting completed.
Explain repairs to customer.
|
|
No
|
Inspect malfunction symptoms again, then repeat from Step 1 if malfunction occurs again.
|
||