PROPELLER SHAFT INSPECTION

id031500800500

1. Use a dial gauge to measure the runout of the propeller shaft at each position.

dbg315zwb005

• If it exceeds the maximum specification, replace the propeller shaft.

Propeller shaft maximum runout

0.4 mm {0.016 in}

2. Inspect the play and rotation of the joint by turning the universal joint in the direction shown by the arrow.

dbg315zwb006

Propeller shaft initial torque (Reference value)

0.29—1.76 N·m {3.0—17.9 kgf·cm, 2.6—15.5 in·lbf}

• If there is excessive play or initial torque, replace the propeller shaft.