VEHICLE SPEED SENSOR (VSS) REMOVAL/INSTALLATION [S15MX-D]

id0316a8153200

Caution

• Water or foreign material entering the connector can cause a poor connection or corrosion. Be sure not to drop water or foreign material on the connector when disconnecting it.

1. Disconnect the negative battery cable.

2. Disconnect the VSS connector.

3. Remove the VSS.

dbg316zwb005

4. Apply the specified oil to a new O‐ring and install it on a VSS.

5. Install the VSS.

Tightening torque

7.8—11.0 N·m {80—112 kgf·cm, 70—97 in·lbf}

6. Connect the VSS connector.

7. Connect the negative battery cable.