CALIPER (FRONT) DISASSEMBLY/ASSEMBLY [4x2 (EXCEPT HIGH CLEARANCE MODEL)]

id0411008010a6

1.  Disassemble in the order indicated in the table.

absggw00001195

1	Piston (See Piston Disassembly Note)
2	Dust seal
3	Piston seal
4	Bleeder cap
5	Bleeder screw
6	Caliper

2.  Assemble in the reverse order of removal.

Piston Disassembly Note

Caution

•  The piston could be damaged if blown out with great force. Blow the compressed air slowly to prevent the piston from suddenly popping out.

1.  Place the piece of wood in the caliper, then blow compressed air through the hole to force the piston out of the caliper.

absggw00001196