 |
dbr411zwb025
LOAD SENSING PROPORTIONING VALVE (LSPV) INSPECTION
id041100811200
1. Place the vehicle on level ground.
2. Check the tire inflations and set them to the recommended pressure if necessary.
3. Check the vehicle with a person in the driver’s seat; include the standard vehicle tools, the spare wheel and tire, and a full tank of fuel.
4. Install the SST to the front wheel cylinder and rear wheel cylinder, then bleed the air in the brake line and LSPV using a air bleed valve A.
dbr411zwb025
|
5. Inspect the fluid pressure of rear wheel cylinder while the fluid pressure of front wheel cylinder is 4,900 kPa {50 kgf/cm2, 711 psi} and 9,800 kPa {100 kgf/cm2, 1,421 psi}.
dbr411zwb026
|
Load sensing proportioning valve (LSPV) fluid pressure
|
Type |
Front wheel cylinder fluid pressure (kPa {kgf/cm2, psi}) |
Rear wheel cylinder (kPa {kgf/cm2, psi}) |
|
|---|---|---|---|
|
4x2 (except high clearance model)
|
Without ABS
|
4,900 {50, 711}
|
2,250—2,850 {23—29, 327—413}
|
|
9,800 {100, 1,421}
|
3,130—3,930 {32—40, 454—569}
|
||
|
With ABS
|
4,900 {50, 711}
|
2,910—3,710 {30—37, 423—538}
|
|
|
9,800 {100, 1,421}
|
4,970—6,170 {51—62, 721—894}
|
||
|
4x2 (high clearance model), 4x4
|
Without ABS
|
4,900 {50, 711}
|
2,250—2,850 {23—29, 327—413}
|
|
9,800 {100, 1,421}
|
3,130—3,930 {32—40, 454—569}
|
||
|
With ABS
|
4,900 {50, 711}
|
2,650—3,450 {28—35, 385—500}
|
|
|
9,800 {100, 1,421}
|
4,700—5,900 {48—60, 682—855}
|
||
