BRAKES TECHNICAL DATA


id045000800100

Item

Specification

Brake fluid type
European (L.H.D.) specs.: SAE J1703, FMVSS 116 DOT-3 or DOT-4
Australian, General (L.H.D., R.H.D.) specs.: SAE J1703, FMVSS 116 DOT-3
Brake pedal height
214—219 mm {8.43—8.62 in}
Standard pedal play
3.0—8.0 mm {0.12—0.31 in}
Standard pedal-to-floor clearance
105 mm {4.14 in} or more
Power brake unit fluid pressure when pedal depressed at 200 N {20 kgf, 45 lbf}
At 0 kPa {0 mmHg, 0 inHg}: 593 kPa {6.1 kgf/cm2, 87 psi} or more
Power brake unit fluid pressure when pedal depressed at 200 N {20 kgf, 45 lbf}
At 67 kPa {500 mmHg, 20 inHg}:
6,950 kPa {70.9 kgf/cm2, 1,009 psi} or more
Minimum front disc pad thickness
2.0 mm {0.079 in} min.
Minimum front disc plate thickness
4x2 (except high clearance model): 22.0 mm {0.867 in}
4x2 (high clearance model), 4x4: 26.0 mm {1.03 in}
Minimum front disc plate thickness after machining using a brake lathe on-vehicle
4x2 (except high clearance model): 22.8 mm {0.898 in}
4x2 (high clearance model), 4x4: 26.8 mm {1.06 in}
Front disc plate runout limit
0.05 mm {0.002 in} max.
Minimum rear brake lining thickness
1.0 mm {0.04 in}
Maximum rear brake drum diameter
4x2 (except high clearance model): 271.5 mm {10.68 in}
4x2 (high clearance model), 4x4: 296.5 mm {11.67 in}
Parking brake lever stroke when pulled at 98 N {10 kgf, 22 lbf}
1—7 notches

Load sensing proportioning valve (LSPV) fluid pressure

Type

Front wheel cylinder fluid pressure

(kPa {kgf/cm2, psi})

Rear wheel cylinder

(kPa {kgf/cm2, psi})

4x2 (except high clearance model)
Without ABS
4,900 {50, 711}
2,250—2,850 {23—29, 327—413}
9,800 {100, 1,421}
3,130—3,930 {32—40, 454—569}
With ABS
4,900 {50, 711}
2,910—3,710 {30—37, 423—538}
9,800 {100, 1,421}
4,970—6,170 {51—62, 721—894}
4x2 (high clearance model), 4x4
Without ABS
4,900 {50, 711}
2,250—2,850 {23—29, 327—413}
9,800 {100, 1,421}
3,130—3,930 {32—40, 454—569}
With ABS
4,900 {50, 711}
2,650—3,450 {28—35, 385—500}
9,800 {100, 1,421}
4,700—5,900 {48—60, 682—855}