DTC TABLE [AUDIO]
id0902f6800300
|
Screen display |
Detection condition |
Possible cause/inspection |
|---|---|---|
|
DTC (When starting on-board diagnostic test function) |
||
|
03: Er01
|
CD player cannot implement insert and eject commands.
|
CD player malfunction
|
|
03: Er02
|
Cannot change tracks.
|
CD player malfunction
|
|
03: Er07
|
CD reading error.
|
• Defective CD (scratches or dirt)
• CD player malfunction
|
|
03: Er10
|
CD player does not operate.
|
• Malfunction of connectors between base unit and CD player
• CD player malfunction
|
|
05: Er01
|
CD changer (external) cannot implement insert, eject, and disc change commands.
|
• Defective CD (curved, broken or foreign material stuck/attached, etc.)
• CD changer (external) malfunction
|
|
05: Er07
|
CD reading error.
|
• Defective CD (curved, broken or foreign material stuck/attached, etc.)
• CD changer (external) malfunction
|
|
05: Er10
|
CD changer (external) does not operate.
|
• Defective CD (curved, broken or foreign material stuck/attached, etc.)
• CD changer (external) malfunction
|
|
06: Er01
|
CD changer cannot implement insert, eject, and disc change commands.
|
• Defective CD (curved, broken or foreign material stuck/attached, etc.)
• CD changer malfunction
|
|
06: Er02
|
Cannot change tracks.
|
• Defective CD (curved, broken or foreign material stuck/attached, etc.)
• CD changer malfunction
|
|
06: Er07
|
CD reading error.
|
• Defective CD (curved, broken or foreign material stuck/attached, etc.)
• CD changer malfunction
|
|
06: Er10
|
CD changer does not operate.
|
• Malfunction of connectors between base unit and CD changer
• CD changer malfunction
|
|
07: Er01
|
MD player cannot implement insert and eject commands.
|
MD player malfunction
|
|
07: Er02
|
Cannot change tracks.
|
MD player malfunction
|
|
07: Er07
|
MD reading error.
|
Defective MD
|
|
07: Er08
|
Blank unrecorded MD is inserted.
|
Defective MD
|
|
07: Er10
|
MD player does not operate.
|
• Malfunction of connectors between base unit and MD player
• MD player malfunction
|
|
09: Er20
|
Audio system does not operate.
|
Voltage at base unit is low.
|
|
09: Er21
|
Broken sound/No sound
|
Inspect the audio system operation according to vehicle condition.
|
|
09: Er22
|
No radio reception
|
Inspect the radio operation according to vehicle condition.
|
|
10: Er01
|
MP3 applicable CD player cannot implement insert and eject commands.
|
MP3 applicable CD player malfunction
|
|
10: Er02
|
Cannot change tracks.
|
MP3 applicable CD player malfunction
|
|
10: Er07
|
MP3 CD reading error.
|
Incorrect format CD
|
|
10: Er09
|
MP3 CD data is unreadable.
|
• CD data error
• No playback data on the CD
|
|
10: Er10
|
MP3 applicable CD player does not operate.
|
• Malfunction of connectors between base unit and MP3 applicable CD player
• MP3 applicable CD player malfunction
|
|
21: Er17
|
Incorrect combination (base unit and center panel)
|
Install the correct base unit or the center panel.
|
|
21: Er18
|
||
|
21: Er19
|
Communication error between base unit and center panel
|
Malfunction of connectors between base unit and center panel
|
|
22: Er01
|
MP3 applicable CD changer cannot implement insert, eject, and disc change commands.
|
• Defective CD (curved, broken or foreign material stuck/attached, etc.)
• MP3 applicable CD changer malfunction
|
|
22: Er02
|
Cannot change tracks.
|
• Defective CD (curved, broken or foreign material stuck/attached, etc.)
• MP3 applicable CD changer malfunction
|
|
22: Er07
|
CD reading error.
|
• Defective CD (curved, broken or foreign material stuck/attached, etc.)
• MP3 applicable CD changer malfunction
|
|
22: Er09
|
MP3 CD data is unreadable.
|
• CD data error
• No playback data on the CD
|
|
22: Er10
|
MP3 applicable CD changer does not operate.
|
• Malfunction of connectors between base unit and MP3 applicable CD changer
• MP3 applicable CD changer malfunction
|
|
no Err
|
No DTCs stored
|
No DTCs stored
|