STARTING PROCEDURE FOR ON-BOARD DIAGNOSTIC TEST MODE [AUDIO]

id0902f6803700

Note

•  All DTCs displayed in the on-board diagnostic test mode should be entered in the Audio Repair Order Form.

1.  Turn the ignition (F2, G6)/engine (WE-C, WL-3, WL-C, WLT-1, WLT-2) switch to the ACC or ON position.

2.  Turn the POWER button off.

3.  While pressing the POWER button, simultaneously press the FM 1 button and the MEDIA button for 2 s or more.

absggw00001714

1	FM 1 button
2	MEDIA button
3	SEEK switch
4	POWER button [without RDS]
5	POWER button [with RDS]

Note

•  If several DTCs are in the memory, they can be displayed using the SEEK switch (up or down).

4.  To stop the on-board diagnostic test mode, turn the ignition (F2, G6)/engine (WE-C, WL-3, WL-C, WLT-1, WLT-2) switch off.