ON-BOARD DIAGNOSTIC SYSTEM [IMMOBILIZER SYSTEM]
id0914001068c3
WE-C, WL-3, WL-C
Outline
DTC Table
DTC |
Output pattern |
Description |
---|---|---|
01
|
![]() |
ID number unregistered in immobilizer unit is input after engine switch is turned to ON position or cranking engine.
|
02
|
![]() |
ID number format error (voltage range, frequency)
|
03
|
![]() |
ID number is not input into immobilizer unit after engine switch is turned to ON position or cranking engine.
|
11
|
![]() |
Coil or wiring harness between immobilizer unit and coil is open circuit.
|
21
|
![]() |
Code word/ID number stored in immobilizer unit EEPROM cannot be read.
|
24
|
![]() |
Open or short circuit in wiring harness between immobilizer unit and PCM.
|
30
|
![]() |
PCM is defective. (Malfunction of communication line inside PCM)
|
WLT-2
Outline
DTC Table
DTC |
Output pattern |
Description |
---|---|---|
01
|
![]() |
ID number unregistered in immobilizer unit is input after engine switch is turned to ON position or cranking engine .
|
02
|
![]() |
ID number format error (voltage range, frequency)
|
03
|
![]() |
ID number is not input into immobilizer unit after engine switch is turned to ON position or cranking engine.
|
11
|
![]() |
Coil or wiring harness between immobilizer unit and coil is open circuit.
|
21
|
![]() |
Code word/ID number stored in immobilizer unit EEPROM cannot be read.
|
24
|
![]() |
Open or short circuit in wiring harness between immobilizer unit and DDS1.
|
25
|
![]() |
IG circuit of immobilizer unit is open circuit or IG circuit of DDS1 is for short to B+ circuit.
|
30
|
![]() |
DDS1 is defective. (Malfunction of communication line inside DDS1)
|
41
|
![]() |
Immobilizer unit or DDS1 is defective. (Code words of immobilizer unit and DDS1 do not match)
|
42
|
![]() |
DDS1 is defective. (Communication error between immobilizer unit and DDS1)
|
44
|
![]() |
DDS1 is defective. (Malfunction of DDS1, except for malfunctions related to DTC 30, 41, or 42
|