SIDE PROTECTOR INSTALLATION

id091600801200

1. Remove the adhesive remaining on the side protector and the body using a razor.

Warning

• Using a razor with bare hands can cause injury. Always wear gloves when using a razor.

2. Remove any grease or dirt from the adhesion surface of the side protector and the body.

3. Attach double‐sided adhesive tape to the side protector as shown in the figure.

Clearance

a: 18.0 mm {0.70 in}

b: 3.0 mm {0.11 in}

c: 2.0—5.0 mm {0.08—0.19 in}

d: 8.0—10.0 mm {0.32—0.39 in}

e: 15.0 mm {0.59 in} (Double cab)

f: 9.0 mm {0.35 in} (Double cab)

g: 9.0—11.0 mm {0.36—0.43 in} (Freestyle cab)

h: 13.0 mm {0.51 in} (Freestyle cab)

i: 8.0 mm {0.31 in} (Freestyle cab)

j: 0.5—2.0 mm {0.02—0.07 in}

dbg916zwb002

4. Peel off the backing paper from the double‐sided adhesive tape and attach the side protector onto the body as shown in the figure.

Clearance

a: 14.8 mm {0.58 in}

b: 4.6 mm {0.18 in} (Double cab)

c: 5.0 mm {0.19 in}

d: 4.5 mm {0.18 in} (Freestyle cab)

dbg916zwb003