FRONT DOOR TRIM REMOVAL/INSTALLATION

id091700802500

1.  Disconnect the negative battery cable. (with power window system)

2.  Open the cap using a small flathead screwdriver and remove the screw.

3.  Remove the inner handle cover.

dpe917zw1035

4.  Remove the regulator handle. (with manual window) (See (REGULATOR HANDLE REMOVAL.)

5.  Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION.)

6.  Remove the screw.

dcg917zwb014

7.  Detach clips A from the front door using a fastener remover.

8.  Pull the front door trim upward and detach tabs B from the front door.

9.  Disconnect the power window main switch connector and the power outer mirror switch connector. (with power window system) (Driver’s side)

10.  Disconnect the power window subswitch connector. (with power window system) (Passenger’s side)

11.  Remove the front door trim.

12.  Install in the reverse order of removal.