HIGH-MOUNT BRAKE LIGHT REMOVAL/INSTALLATION

id091800802000

1.  Disconnect the negative battery cable.

2.  Remove in the order indicated in the table.

dcf918zwb209

1	Cover (See Cover Removal Note.)
2	Screw
3	High-mount brake light
4	Connector
5	High-mount brake light bulb
6	Socket

3.  Install in the reverse order of removal.

Cover Removal Note

1.  Insert a tape-wrapped flathead screwdriver into the service hole, and pry it to secure a space.

dcf918zwb210

2.  Insert your hand into the space and remove the cover in the direction shown in the figure.