1. Slave cylinder inspection
1) Clean the cylinder body.
2) Inspect the cylinder body.
Note
- Inspect the fluid return port for clogging, and if necessary clean.
RZ4E
4JJ3
3) Visually inspect the piston and piston cup for wear and damage.
Note
- Replace the internal parts shown in the diagram with new repair kit A.
2. Slave cylinder measurement
1) Clean the cylinder body.
2) Measure the inner diameter of the cylinder body using a cylinder gauge.
3) Measure the outer diameter of the piston using a micrometer.
4) Calculate the clearance from measured value.
Note
- Subtract the outer diameter of the piston from the inner diameter of the cylinder body, and calculate the clearance from the difference.
- If the reading exceeds the limit, replace the slave cylinder as an assembly.
Standard: 0.07 mm { 0.0028 in }
Limit: 0.15 mm { 0.0059 in }