Engine oil replacement (RZ4E-TC)

1. Engine oil drain

1) Remove the drain plug from the oil pan, and drain the engine oil to a pan.

2) Install the drain plug to the oil pan.

Caution

  • Do not reuse the gasket.
  • Wipe off any oil attached to the drain plug hole.
  • Do not forget to tighten the drain plug.

Tightening torque: 83 N・m { 8.5 kgf・m / 61 lb・ft }

2. Engine oil filling

1) Replenish the engine with the engine oil.

2) Check the tightening of the oil pan drain plug.

Tightening torque: 83 N・m { 8.5 kgf・m / 61 lb・ft }

Copyright Mazda Motor Corporation. All rights reserved.