Fuel filter element removal (RZ4E-TC)

1. Preliminary and post procedures

1. Preliminary procedures

1) Open the engine hood.

2) Disconnect the battery cable from the battery negative terminal.

Caution

  • After turning OFF the ignition switch (power mode for models with passive entry and start system), do not disconnect the battery cable within 3 minutes.
  • If the battery cable is disconnected within 3 minutes, the vehicle electronic control system may malfunction.
  • If the battery cable is disconnected, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function after connecting the battery negative terminal.

2. Fuel filter element removal

1) Remove the element case and O-ring from the fuel filter body.

2) Remove the fuel filter element from the element case.

Caution

  • Do not reuse the O-ring or gasket.
  • Use an ISUZU genuine fuel filter for element replacement.

Legend

  1. Fuel filter body
  2. Fuel filter element
  3. O-ring
  4. Element case
Copyright Mazda Motor Corporation. All rights reserved.