1. TCM safety information
Caution
- If replacing the TCM, it is necessary to write the vehicle information into the new TCM.
- If the VIN is not written into the TCM, DTC P0631 is set.
2. Preliminary and post procedures
1. Preliminary procedures
1) Open the engine hood.
2) Disconnect the battery cable from the battery negative terminal.
Caution
- After turning OFF the ignition switch (power mode for models with passive entry and start system), do not disconnect the battery cable within 3 minutes.
- If the battery cable is disconnected within 3 minutes, the vehicle electronic control system may malfunction.
- If the battery cable is disconnected, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function after connecting the battery negative terminal.
3. Glove box removal
1) Remove the glove box from the instrument panel.
RHD
Legend
- Glove box
LHD
Legend
- Glove box
4. Instrument panel passenger-side lower cover removal
1) Remove the instrument panel passenger-side lower cover from the instrument panel.
RHD
Legend
- Instrument panel passenger-side lower cover
- Clip
LHD
Legend
- Instrument panel passenger-side lower cover
- Clip
2) Disconnect the connector from the instrument panel passenger-side lower cover.
5. TCM removal
1) Remove the TCM and control module bracket as a set from the reinforcement.
2) Remove the TCM from the control module bracket.
RHD
Legend
- TCM
- Control module bracket
LHD
Legend
- TCM
- Control module bracket