Rear seat reassembly

1. Component views

Rear seat (Crew cab)

Part name

  1. Rear seat cushion cover (RH)
  2. Rear seat cushion pad (RH)
  3. Rear seat back cover
  4. Rear seat back pad
  5. Rear seat headrest
  6. Headrest holder
  7. Rear seat back frame
  8. Armrest
  9. Side cover
  10. Bolt
  11. Bolt
  12. Nut
  13. Hinge bracket
  14. Nut
  15. Rear seat cushion frame (LH)
  16. Rear seat cushion frame (RH)
  17. Rear seat cushion pad (LH)
  18. Rear seat cushion cover (LH)
  19. Seat belt reminder sensor (RH) (If so equipped)
  20. Seat belt reminder sensor (Center) (If so equipped)
  21. Seat belt reminder sensor (LH) (If so equipped)

Tightening torque

10: 25 N・m { 2.5 kgf・m / 18 lb・ft }

11: 46 N・m { 4.7 kgf・m / 34 lb・ft }

12: 46 N・m { 4.7 kgf・m / 34 lb・ft }

14: 25 N・m { 2.5 kgf・m / 18 lb・ft }

Rear seat (Extend cab)

Part name

  1. Rear seat cover
  2. Nut
  3. Rear seat cushion pad
  4. Rear seat cushion cover

Tightening torque

2: 46 N・m { 4.7 kgf・m / 34 lb・ft }

2. Rear seat cushion reassembly

1. Crew cab

1) Install the rear seat cushion cover to the rear seat cushion pad using hog ring pliers.

Caution

  • Install the rear seat cushion cover to the rear seat cushion pad so as not to form wrinkles.
  • Do not reuse the hog ring.

Note

  • Referring to the diagram, install the hog ring.

Legend

  1. Rear seat cushion cover (RH)
  2. Rear seat cushion pad (RH)
  3. Rear seat cushion pad (LH)
  4. Rear seat cushion cover (LH)
  5. Hog ring
  6. Rear seat cushion cover
  7. Hog ring
  8. Rear seat cushion pad

2) Install the rear seat cushion cover and rear seat cushion pad to the rear seat cushion frame.

Legend

  1. Rear seat cushion cover and rear seat cushion pad (RH)
  2. Rear seat cushion frame (RH)
  3. Rear seat cushion frame (LH)
  4. Rear seat cushion cover and rear seat cushion pad (LH)

3) Install the hinge cover to the seat cushion.

Legend

  1. Hinge cover
  2. Rear seat cushion (RH)
  3. Rear seat cushion (LH)

4) Press the seat cushion cover and install to the fastener on the rear seat cushion pad side.

2. Extend cab

1) Install the rear seat cushion cover to the rear seat cushion pad.

Caution

  • Install the rear seat cushion cover to the rear seat cushion pad so as not to form wrinkles.

Legend

  1. Rear seat cushion cover
  2. Rear seat cushion pad

2) Connect the rear seat cushion cover to the rear seat cushion pad using hog ring pliers.

Caution

  • Do not reuse the hog ring.

Legend

  1. Rear seat cushion cover
  2. Hog ring
  3. Rear seat cushion pad

3) Connect the hook section and install the rear seat cushion cover to the rear seat.

Legend

  1. Rear seat cushion cover

3. Rear seat back reassembly

1. Crew cab

1) Install the rear seat back cover to the rear seat back pad using hog ring pliers.

Caution

  • Install the rear seat back cover to the rear seat back pad so as not to form wrinkles.
  • Do not reuse the hog ring.

Note

  • Referring to the diagram, install the hog ring.

Legend

  1. Rear seat back cover
  2. Rear seat back pad
  3. Hog ring
  4. Rear seat back cover
  5. Hog ring
  6. Rear seat back pad

2) Press the rear seat back cover and install to the fastener on the rear seat back pad side.

3) Install the seat back cover and rear seat back pad to the rear seat back frame.

Legend

  1. Rear seat back cover and rear seat back pad
  2. Rear seat back frame

4) Install the armrest to the rear seat back frame.

Note

  • Install the resin clip on the rear seat back cover and fastener.

Legend

  1. Rear seat back
  2. Armrest

5) Install the headrest holder to the rear seat back.

Legend

  1. Headrest holder
  2. Rear seat back

6) Install the cushion rubber to the rear seat back.

Legend

  1. Cushion rubber
  2. Rear seat back

4. Rear seat back installation

1. Crew cab

1) Install the headrest to the rear seat.

2) Install the rear seat back to the rear seat cushion.

Legend

  1. Rear seat cushion
  2. Rear seat back
  3. Rear seat cushion
  4. Hinge bracket
  5. Center hinge bracket