Turbocharger control solenoid valve installation (RZ4E-TC)

1) Install the bracket to the cylinder head.

Tightening torque: 25 N・m { 2.5 kgf・m / 18 lb・ft }

2) Install the turbocharger control solenoid valve to the bracket.

Tightening torque: 10 N・m { 1.0 kgf・m / 7 lb・ft }

3) Install the connector to the turbocharger control solenoid valve.

4) Connect the vacuum hose to the turbocharger control solenoid valve.

1) Install the engine cover to the engine.

Legend

1. Post procedures

1) Connect the battery cable to the battery negative terminal.

2) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.

Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".

3) Close the engine hood.