1. EGR cooler bypass control solenoid valve installation
1) Install the EGR cooler bypass control solenoid valve to the bracket.
Tightening torque: 25 N・m { 2.5 kgf・m / 18 lb・ft }
Caution
- Securely place the claw section of the EGR cooler bypass control solenoid valve so that it comes in contact with the bracket.
Legend
- Claw section
2) Connect the vacuum hose to the EGR cooler bypass control solenoid valve.
3) Connect the connector to the EGR cooler bypass control solenoid valve.
Legend
- EGR cooler bypass control solenoid valve
- Vacuum hose
2. Oil level gauge guide tube installation
1) Apply engine oil to the O-ring.
Caution
- Do not reuse the O-ring.
2) Install the oil level gauge guide tube to the crankcase.
Tightening torque: 25 N・m { 2.5 kgf・m / 18 lb・ft }
3) Install the oil level gauge to the oil level gauge guide tube.
3. Preliminary and post procedures
1. Post procedures
1) Connect the battery cable to the battery negative terminal.
2) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.
Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".
3) Close the engine hood.