Glow plug removal (RZ4E-TC)

1. Preliminary and post procedures

1. Preliminary procedures

1) Open the engine hood.

2) Disconnect the battery cable from the battery negative terminal.

Caution

  • After turning OFF the ignition switch (power mode for models with passive entry and start system), do not disconnect the battery cable within 3 minutes.
  • If the battery cable is disconnected within 3 minutes, the vehicle electronic control system may malfunction.
  • If the battery cable is disconnected, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function after connecting the battery negative terminal.

2. Glow plug removal

1) Remove the glow plug terminal and glow plug connector from the glow plug.

Legend

  1. Glow plug terminal
  2. Glow plug connector

2) Remove the glow plug from the cylinder head.

Copyright Mazda Motor Corporation. All rights reserved.