Flywheel inspection (RZ4E-TC)

1. Flywheel inspection

1. Visual inspection

1) Inspect the flywheel and mounting bolts for the following.

  • Cracking
  • Damage

Note

  • Replace the flywheel or mounting bolt if an abnormal condition is found.

2) Inspect the ring gear for the following.

  • Damage
  • Significant wear

Note

  • Replace the ring gear if an abnormal condition is found.

2. Flywheel wear measurement

1) Measure the flywheel friction surface depth using a vernier caliper.

Note

  • The depth from the pressure plate installation surface to the friction surface is indicated.

Standard: 0 mm { 0.00 in }

Legend

  1. Ring gear
  2. Wear
  3. Flywheel
Copyright Mazda Motor Corporation. All rights reserved.