Immobilizer coil removal

1. Preliminary and post procedures

1. Preliminary procedures

1) Open the engine hood.

2) Disconnect the battery cable from the battery negative terminal.

Caution

  • After turning OFF the ignition switch (power mode for models with passive entry and start system), do not disconnect the battery cable within 3 minutes.
  • If the battery cable is disconnected within 3 minutes, the vehicle electronic control system may malfunction.
  • If the battery cable is disconnected, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function after connecting the battery negative terminal.

2. Steering cowl removal

1) Turn the steering wheel 90° to the right and left and remove the screw from the steering cowl.

Legend

  1. Screw

Legend

  1. Screw

2) Remove the steering cowl from the steering shaft.

Legend

  1. Steering upper cowl
  2. Steering lower cowl

3. Immobilizer coil removal

1) Disconnect the connector from the immobilizer coil.

2) Remove the immobilizer coil from the steering lock.

Copyright Mazda Motor Corporation. All rights reserved.