Side turn signal light (door mirror integrated type) removal

1. Preliminary and post procedures

1. Preliminary procedures

1) Open the engine hood.

2) Disconnect the battery cable from the battery negative terminal.

Caution

  • After turning OFF the ignition switch (power mode for models with passive entry and start system), do not disconnect the battery cable within 3 minutes.
  • If the battery cable is disconnected within 3 minutes, the vehicle electronic control system may malfunction.
  • If the battery cable is disconnected, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function after connecting the battery negative terminal.

2. Door mirror cover removal

1) Remove the door mirror upper cover from the door mirror.

Legend

  1. Door mirror upper cover

2) Remove the door mirror lower cover from the door mirror.

Legend

  1. Door mirror lower cover

3. Side turn signal light (door mirror integrated type) removal

1) Remove the side turn signal light from the door mirror.

Legend

  1. Side turn signal light
  2. Door mirror
Copyright Mazda Motor Corporation. All rights reserved.