Front planetary ring gear reassembly (AWR6B45)

1. Component views

Gear and shaft

Part name

  1. Thrust needle roller bearing with race
  2. Thrust bearing race
  3. Sun gear input drum
  4. Thrust needle roller bearing with race
  5. Thrust bearing race
  6. Front planetary gear assembly
  7. Thrust bearing race
  8. Thrust needle roller bearing with race
  9. Front planetary ring gear
  10. Snap ring
  11. Front planetary ring gear flange sub-assembly
  12. Thrust bearing race
  13. Thrust needle roller bearing with race
  14. Snap ring
  15. Middle planetary ring gear flange
  16. Middle planetary ring gear
  17. Thrust needle roller bearing
  18. Thrust bearing race
  19. Middle planetary gear assembly
  20. Planetary sun gear
  21. Snap ring
  22. Rear planetary ring gear flange
  23. Rear planetary ring gear
  24. Thrust bearing race
  25. Thrust needle roller bearing
  26. Thrust bearing race
  27. Intermediate shaft
  28. Thrust needle roller bearing with race
  29. Thrust bearing race
  30. Rear planetary gear assembly

2. Front planetary ring gear flange installation

1) Set the snap ring onto the front planetary ring gear flange sub-assembly. Using needle-nose pliers, insert the snap ring into the front planetary ring gear while squeezing it, and then expand the snap ring to install it.

Copyright Mazda Motor Corporation. All rights reserved.