1. Component views
Front propeller shaft
Part name
- Bolt, nut, and washer (Front drive axle side)
- Nut
- Bolt, nut, and washer (Transfer side)
- Nut
Tightening torque
2: 59 N・m { 6.0 kgf・m / 44 lb・ft }
4: 59 N・m { 6.0 kgf・m / 44 lb・ft }
2. Preliminary and post procedures
1. Preliminary procedures
1) Raise the vehicle.
3. Front propeller shaft removal
1) Support the vehicle using a chassis stand.
2) Change the gear shift lever to the neutral position.
3) Release the parking brake.
4) Place alignment marks on the flange yoke, front drive axle flange, and transfer flange.
Caution
- Because the propeller shaft is adjusted to have precise balance, always place alignment marks on each of the joints before removing or disassembling.
5) Remove the propeller shaft from vehicle.