Each terminal No. indicates the body side connector terminal.
1) Start the engine.
2) Disconnect the connector from the intake actuator.
3) Measure the voltage between the intake actuator No. 1 terminal and the ground using a DMM.
Specified value: Battery voltage
4) If there is a malfunction, repair the harness between the intake actuator No. 1 terminal and the Electrical (IG1) radio fuse.
1) Inspect for continuity between the intake actuator No. 4 terminal and the control panel No. 23 terminal using a DMM.
2) Inspect for continuity between the intake actuator No. 5 terminal and the control panel No. 24 terminal using a DMM.
3) Replace the control panel with a new one.