Relief valve control solenoid valve installation (RZ4E-TC)

1) Install the relief valve control solenoid valve to the bracket.

Tightening torque: 3.4 N・m { 0.3 kgf・m / 30 lb・in }

Legend

2) Install the relief valve control solenoid valve and bracket to the relief valve.

Tightening torque: 25 N・m { 2.5 kgf・m / 18 lb・ft }

3) Connect the connector to the relief valve control solenoid valve.

4) Connect the vacuum hose to the relief valve control solenoid valve.

1) Install the intake duct to the intake throttle valve.

Tightening torque: 10.0 N・m { 1.0 kgf・m / 89 lb・in } Bolt

Tightening torque: 4.0 N・m { 0.4 kgf・m / 35 lb・in } Clamp (Intake throttle side)

Standard value

a: 45 °

2) Connect the connector to the boost pressure and CAC temperature sensor.

1) Install the air intake hose to the intake air duct and intercooler.

Tightening torque: 5.0 N・m { 0.5 kgf・m / 44 lb・in }

Legend

1. Post procedures

1) Connect the battery cable to the battery negative terminal.

2) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.

Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".

3) Close the engine hood.