1. Transfer oil vehicle inspection
1) Stop the vehicle in a flat location.
2) Remove the transfer filler plug.
3) Inspect if the oil is filled up to the lower surface of the hole by inserting a finger into the filler plug hole.
Legend
- Filler plug
- Drain plug
- Oil surface
- Lower surface of the hole
4) Add oil if the oil level is below the specified amount.
Oil to be used
BESCO GEAR OIL TRANSAXLE 5W-30 or equivalent
5) Tighten the filler plug to the specified torque.
Caution
- Do not reuse the O-ring.
Tightening torque: 39 N・m { 4.0 kgf・m / 29 lb・ft }