Clutch switch removal (MVL)

1. Preliminary and post procedures

1. Preliminary procedures

1) Disconnect the battery cable from the battery negative terminal.

Caution

  • After turning OFF the ignition switch (power mode for models with passive entry and start system), do not disconnect the battery cable within 3 minutes.
  • If the battery cable is disconnected within 3 minutes, the vehicle electronic control system may malfunction.
  • If the battery cable is disconnected, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function after connecting the battery negative terminal.

2. Clutch switch removal

1) Disconnect the harness connector from the clutch switch.

2) Remove the clutch switch from the clutch pedal assembly.

Legend

  1. Clutch switch
Copyright Mazda Motor Corporation. All rights reserved.