Starter motor installation (4JJ3 with DPD)

Part name

Tightening torque

3: 97 N・m { 9.9 kgf・m / 72 lb・ft }

1) Install the starter motor to the rear plate.

Tightening torque: 97 N・m { 9.9 kgf・m / 72 lb・ft }

2) Connect the earth cable to the starter motor.

1) Apply engine oil to the O-ring.

2) Install the oil level gauge guide tube to the crankcase.

Tightening torque: 25 N・m { 2.5 kgf・m / 18 lb・ft }

3) Install the oil level gauge to the oil level gauge guide tube.

1. Post procedures

1) Connect the battery cable to the battery negative terminal.

2) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.

Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".

3) Close the engine hood.