1. Vehicle speed sensor installation
1) Install the vehicle speed sensor to the speedometer bushing.
Note
- Align the shaft notched section of the speedometer driven gear with the protruding portion of the coupling pin, and assemble.
Tightening torque: 25 N・m { 2.5 kgf・m / 18 lb・ft }
Legend
- Protruding section of coupling pin
- Shaft notched section of the speedometer driven gear
2) Connect the harness connector to the vehicle speed sensor.
2. Preliminary and post procedures
1. Post procedures
1) Connect the battery cable to the battery negative terminal.
2) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.
Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".
3) Close the engine hood.