Rear pillar trim cover (crew cab) removal

1. Component views

Crew cab

Part name

  1. Front pillar trim cover
  2. Front door finisher
  3. Front tongue side seat belt
  4. Center pillar upper trim cover
  5. Assist grip
  6. Rear door finisher
  7. Rear upper trim cover
  8. Rear lower trim cover
  9. Rear end upper trim cover
  10. Rear end trim cover
  11. Rear tongue side seat belt
  12. Rear tongue side center seat belt
  13. Rear sill plate
  14. Center pillar lower trim cover
  15. Front sill plate
  16. Assist grip
  17. Dash side trim pad

2. Rear sill plate removal

1) Remove the rear sill plate from the floor.

Legend

  1. Rear sill plate
  2. Clip
  3. Claw section

3. Rear door finisher removal

1) Remove the rear door finisher from the body.

4. Rear end upper trim cover removal

1) Remove the rear end upper trim cover from the body panel.

Caution

  • For models with center top tethers (bracket type), disengage the clips and claws, and then pull upward while bending the end of the rear end upper trim to an extent that it will not get damaged.

Models with center top tethers (bracket type)

Legend

  1. Seat belt guide cover
  2. Rear end upper trim cover
  3. Clip
  4. Claw section
  5. Hook
  6. Bend the end of the rear end upper trim cover.
  7. Pull out the rear end upper trim upward.
  8. Center top tether (Bracket type)

Models without center top tethers (bracket type)

Legend

  1. Seat belt guide cover
  2. Rear end upper trim cover
  3. Clip
  4. Claw section
  5. Hook

5. Rear pillar trim cover removal

1) Remove the rear pillar lower trim cover from the rear pillar.

Legend

  1. Claw section
  2. Rear pillar lower trim cover
  3. Clip

2) Remove the rear pillar upper trim cover from the rear pillar.

Legend

  1. Rear pillar upper trim cover
  2. Clip
  3. Hook
Copyright Mazda Motor Corporation. All rights reserved.