Turbocharger control solenoid valve removal (RZ4E-TC)

1. Preliminary and post procedures

1. Preliminary procedures

1) Open the engine hood.

2) Disconnect the battery cable from the battery negative terminal.

Caution

  • After turning OFF the ignition switch (power mode for models with passive entry and start system), do not disconnect the battery cable within 3 minutes.
  • If the battery cable is disconnected within 3 minutes, the vehicle electronic control system may malfunction.
  • If the battery cable is disconnected, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function after connecting the battery negative terminal.

2. Engine cover removal

1) Remove the engine cover from the engine.

Legend

  1. Engine cover

3. Turbocharger control solenoid valve removal

1) Disconnect the vacuum hose from the turbocharger control solenoid valve.

2) Remove the connector from the turbocharger control solenoid valve.

3) Remove the turbocharger control solenoid valve from the bracket.

4) Remove the bracket from the cylinder head.

Copyright Mazda Motor Corporation. All rights reserved.