Oil filter element removal (RZ4E-TC)

1. Component views

Oil filter element

Part name

  1. Oil filter cap
  2. Oil filter element

Tightening torque

1: 25 N・m { 2.5 kgf・m / 18 lb・ft }

2. Preliminary and post procedures

1. Preliminary procedures

1) Open the engine hood.

3. Oil filter element removal

1) Disconnect the harness clip from the bracket.

Legend

  1. Harness clip
  2. Bracket
  3. Oil filter

2) Remove the cap and oil filter element from the oil filter.

3) Remove the oil filter element and O-ring from the cap.

Caution

  • Do not reuse the O-ring.

Legend

  1. Cap
  2. O-ring
  3. Oil filter element
Copyright Mazda Motor Corporation. All rights reserved.