1. Component views
Front bumper
Part name
- Front bumper
- Nut
- Front bumper impact support
- Bolt
- Front bumper impact bar
- Bolt
- Bumper frame bracket
Tightening torque
2: 8.9 N・m { 0.9 kgf・m / 79 lb・in }
4: 62 N・m { 6.3 kgf・m / 46 lb・ft }
6: 8.9 N・m { 0.9 kgf・m / 79 lb・in }
2. Sonar sensor installation
1. Models with front sonar sensors
1) Install the sonar sensor bracket to the front bumper.
Note
- Align the rib with the notched section to install it.
Legend
- Notched section
- Rib
- Sonar sensor bracket
2) Install the sonar sensor to the sonar sensor bracket.
Caution
- Insert so that the connector faces in the same direction as the mark.
- Securely engage the claws of the sonar sensor with the sonar sensor bracket lock section.
Legend
- Mark
- Sonar sensor bracket
- Sonar sensor
3. Radiator grille installation
1) Install the radiator grille to vehicle.
Tightening torque: 1.7 N・m { 0.2 kgf・m / 15 lb・in }
Legend
- Radiator grille
4. Front turn signal light installation
1) Install the front turn signal light to the bracket.
Tightening torque: 1.7 N・m { 0.17 kgf・m / 15.0 lb・in }
Legend
- Front turn signal light
2) Install the bracket to the front bumper.
5. Front air dam installation
1) Install the front air dam to the front bumper.
Tightening torque: 3.0 N・m { 0.31 kgf・m / 26.6 lb・in }
Legend
- Front air dam (Left side)
- Front air dam (Center)
- Front air dam (Right side)
6. Bumper frame bracket installation
1) Install the bumper frame bracket to vehicle.
Tightening torque: 8.9 N・m { 0.9 kgf・m / 79 lb・in }
Legend
- Bumper frame bracket
7. Front bumper impact bar installation
1) Install the front bumper impact bar to the vehicle.
Tightening torque: 62 N・m { 6.3 kgf・m / 46 lb・ft }
Legend
- Front bumper impact bar
8. Front bumper impact support installation
1) Install the front bumper impact support to the vehicle.
Tightening torque: 8.9 N・m { 0.9 kgf・m / 79 lb・in }
Legend
- Front bumper impact support
2) Install the headlight fixing bolt to the front bumper impact support.
Tightening torque: 8.5 N・m { 0.9 kgf・m / 75 lb・in }
3) Connect the air guide to the front bumper impact support.