Rear step bumper reassembly

1. Component views

Rear step bumper

Part name

  1. Step pad center
  2. Step pad side
  3. Shell
  4. Bolt
  5. Bolt
  6. Back bar
  7. Reinforcement

Tightening torque

4: 51 N・m { 5.2 kgf・m / 38 lb・ft }

5: 150 N・m { 15.3 kgf・m / 111 lb・ft }

2. Sonar sensor installation

1. Models with rear sonar sensors

1) Install the sonar sensor bracket to the rear step bumper.

Note

  • Align the rib with the notched section to install it.

Legend

  1. Notched section
  2. Rib
  3. Sonar sensor bracket

2) Install the sonar sensor to the sonar sensor bracket.

Caution

  • Insert so that the connector faces in the same direction as the mark.
  • Securely engage the claws of the sonar sensor with the sonar sensor bracket lock section.

Legend

  1. Mark
  2. Sonar sensor bracket
  3. Sonar sensor
Copyright Mazda Motor Corporation. All rights reserved.