1. Front planetary ring gear flange inspection
1) Using a caliper gauge, measure the inside diameter of the front planetary ring gear flange sub-assembly bushing.
Standard: 54.038 to 54.063 mm { 2.1275 to 2.1285 in }
Caution
- Measure the inside diameter at several places (More than 3 places) and take an average. If the average is greater than the maximum, replace the front planetary ring gear flange sub-assembly with a new one.
- When the front planetary ring gear flange sub-assembly is replaced, inspect the surface in contact with the front planetary gear assembly. If the surface is scratched or discolored, replace the front planetary gear assembly with a new one.
