Tweeter removal

1. Preliminary and post procedures

1. Preliminary procedures

1) Open the engine hood.

2) Disconnect the battery cable from the battery negative terminal.

Caution

  • After turning OFF the ignition switch (power mode for models with passive entry and start system), do not disconnect the battery cable within 3 minutes.
  • If the battery cable is disconnected within 3 minutes, the vehicle electronic control system may malfunction.
  • If the battery cable is disconnected, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function after connecting the battery negative terminal.

2. Tweeter removal

1) Remove the speaker grille from the instrument panel.

2) Remove the tweeter from the instrument panel.

Legend

  1. Speaker grille
  2. Tweeter
  3. Screw

3) Disconnect the connector from the tweeter.

Copyright Mazda Motor Corporation. All rights reserved.