Stereo camera installation

1. Stereo camera installation

Caution

  • Perform work without touching the stereo camera lens.
  • If the stereo camera lens is touched, replace the stereo camera.
  • Do not subject the stereo camera to a strong impact.

1) Clean the inside of the stereo camera bracket opening using air.

Legend

  1. Stereo camera bracket opening

2) When installing a new stereo camera, remove the lens cap from the stereo camera.

Legend

  1. Lens cap
  2. Stereo camera

3) Install the stereo camera to the stereo camera bracket.

Caution

  • Do not press the aluminum tape section.

Legend

  1. Aluminum tape
  2. Stereo camera

4) Connect the connector to the stereo camera.

5) Install the stereo camera cover to the front windshield glass.

Legend

  1. Stereo camera cover

6) Slide the stereo camera cover in the direction of the arrow.

Caution

  • Make sure that the claw section is locked.

Legend

  1. Claw section
  2. Stereo camera cover

7) Install the stereo camera cover lid to the stereo camera cover.

Legend

  1. Claw section
  2. Stereo camera cover lid

2. Preliminary and post procedures

1. Post procedures

1) Connect the battery cable to the battery negative terminal.

2) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.

Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".

3) Close the engine hood.

Copyright Mazda Motor Corporation. All rights reserved.