Keyless entry key reassembly

1. Keyless entry key reassembly

1) Install the battery to the transmitter.

Note

  • Install a new battery CR1620 with the positive (+) side up.

2) Install the battery cover to the transmitter.

3) Install the transmitter to the keyless entry key.

4) Close the key cover.

5) Install the key ring to the keyless entry key.

Legend

  1. Key cover
  2. Battery cover
  3. Transmitter
  4. Key
  5. Key ring
  6. Battery
  7. Battery holder
Copyright Mazda Motor Corporation. All rights reserved.