Headlight auto leveling control unit installation

1) Install the headlight auto leveling control unit to the floor.

Tightening torque: 8.0 N・m { 0.8 kgf・m / 71 lb・in }

Legend

2) Connect the connector to the headlight auto leveling control unit.

1. Except models with console boxes

1) Install the extension of the center console to the center console.

Legend

1. Models with console boxes

Refer to "9.Body, Cab, Accessories 9L.Exterior, Interior Trim console box installation".

1. Post procedures

1) Connect the battery cable to the battery negative terminal.

2) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.

Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".

3) Close the engine hood.