1. Hazard warning flasher switch installation
1) Install the hazard warning flasher switch to the instrument panel (upper side).
Legend
- Hazard warning flasher switch
2. Audio and navigation system installation
1. Models equipped with display units
1) Connect the connector to the display unit.
2) Install the display unit as a set with the bezel to the instrument panel.
Legend
- Bezel
- Display unit
- Clip
2. Models equipped with 2DIN audio
1) Connect the connector to the 2DIN audio.
2) Install the 2DIN audio as a set with the bezel to the instrument panel.
Note
- Align the pin position with the bracket to install.
Legend
- Bezel
- 2DIN audio
- Pin
3. Preliminary and post procedures
1. Post procedures
1) Connect the battery cable to the battery negative terminal.
2) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.
Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".
3) Close the engine hood.