front bumper removal

1. Component views

Front bumper

Part name

Tightening torque

2: 8.9 N・m { 0.9 kgf・m / 79 lb・in }

4: 62 N・m { 6.3 kgf・m / 46 lb・ft }

6: 8.9 N・m { 0.9 kgf・m / 79 lb・in }

1) Open the engine hood.

2) Disconnect the battery cable from the battery negative terminal.

Caution

After turning OFF the ignition switch (power mode for models with passive entry and start system), do not disconnect the battery cable within 3 minutes.
If the battery cable is disconnected within 3 minutes, the vehicle electronic control system may malfunction.
If the battery cable is disconnected, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function after connecting the battery negative terminal.

1) Remove the inner liner from the front fender panel.

1) Remove the intake air duct from the air cleaner box and radiator core support.

Legend

2) Remove the soft nose from the front bumper support.

3) Remove the front bumper support from vehicle.

Legend

4) Remove the front bumper from the vehicle.

Legend

5) Disconnect the connector from the front bumper.